Gun Tec

Specifications

 
The thermal imaging clip-on device Dedal-380 T2 Quest L is intended for mounting in front of an observation device (spotting scope, binoculars) for observation in all lighting and weather conditions, including complete darkness, heavy rain, snow or fog.
The low weight and the size of the plug-on attachment enable mounting on the objective lens of a daylight device directly via a push-on ring adapter.
  , , ,
The clip-on is equipped with a connection for video recording and switching to an external power source. It works fully automatically and does not require any additional adjustments to changing environmental conditions. The start time is less than 3 seconds. A high level of detail of the picture and its background, both cold and warm objects, is the distinguishing feature of the clip.
 

Note:

THIS APPLIANCE IS MULTIFUNCTIONAL, WE ASK YOU FOR OBSERVANCE AND COMPLIANCE WITH THE STATUTORY PROVISIONS OF YOUR COUNTRY

 Dedal-380 T2 Quest L
Optical Magnification
Optical magnification in the monocular mode
Horizontal Angular Field of View, m/100m (degrees)
12.9(7.4)
Vertical Angular Field of View, m/100m (degrees)
9.8 (5.6)
Objective Focal Length and F-number
100 mm F/1.2
Focus Range
from 5 to ∞
Thermal Sensor
Uncooled mirobolometer array
Thermal Sensor Spectral Range, µm
from 8 to 14
Thermal Sensor Resolution, pixels
384×288
Thermal Sensor Pixel Size, µm
17
Thermal Sensor Frame Rate, Hz
50
Startup Time, sec
<3
Calibration Concept
programmatic, shutterless
Thermal Sensor Sensitivity (NETD), °К
<0.07
Display Type
AMOLED
Display Resolution, pixels
800×600
Exit Pupil, mm
30
Power Source
Two CR123 batteries
Power Voltage, V
6
Batteries Lifetime at 23 °C, hours
4
Dimensions, (LxWxH), mm
273×71×73
Weight, kg
0.64
Operational Temperature, °C
from -40 to +50
Operational Humidity, %
up to 98
IP Rating
IP67